1988-1991 Chevrolet C1500 2WD Standard Cab 5"/7" Spindle + Coil Lowering Kit + Shocks, C-Notch
This Trekline package is configured around the Chevrolet C1500 suspension so the front lowering method, rear drop hardware and supporting components work as one setup.
This is the dedicated 1988-1991 Standard Cab version. Trekline separates these trucks from its broader 1988-1998 C1500 kits, so this SKU should not be substituted with a 1300-series kit.
Kit Contents:
- 2-inch front drop spindles (pair)
- 3-inch front lowering coils (pair)
- 6-inch rear axle flip kit
- 1-2 inch adjustable rear drop shackles
- front drop shocks (pair)
- rear drop shocks (pair)
- bolt-on rear C-notch kit with mounting hardware
Vehicle Fitment:
- 1988-1991 Chevrolet C1500 2WD Standard Cab only
Important Fitment & Installation Notes:
- Cab fitment: 1988-1991 Chevrolet C1500 2WD Standard Cab only. Do not use on Extended Cab trucks or 1992+ models.
- Brake rotor check: the Standard Cab spindle application is associated with the 1.00-inch front rotor setup. Measure rotor thickness and verify the complete brake/spindle configuration before ordering.
- Front and rear drop shocks are included so shock travel is matched more closely to the supplied lowering combination.
- A bolt-on rear C-notch is included to provide additional axle-to-frame clearance at the listed rear drop.
- Inspect driveshaft operating angle after lowering. Trucks with a 2-piece driveshaft may need carrier-bearing geometry correction depending on the final setup.
- Measure the truck before ordering. Lowering amounts are referenced from stock OEM ride height, so worn springs or previous suspension changes can affect the measured result.
- Perform a professional alignment after installation and verify wheel/tire clearance, brake-hose routing, bump-stop clearance, shock travel and fastener torque before regular road use.
Front Drop: 5 inches
Rear Drop: 7-8 inches (adjustable shackle position)
Placement: Front & Rear
Brand: Trekline Motorsports
Trekline SKU: 1350DR042
