1988-1991 Chevrolet/GMC C1500 Standard Cab 2WD 4" Lift Kit with 2" Rear Leveling Block - 1" Rotors + Front & Rear Shocks | Trekline 1350LFT110006
For an OBS Chevrolet or GMC standard-cab 2WD that measures about 1 inch at the front rotor, this 4-inch Trekline lift package combines the correct light-duty spindle geometry with a 2-inch rear block. SKC names the package by its 4-inch front lift height; the 2-inch rear block is listed separately because it is the rear stance/leveling component, not a second advertised lift-kit height.
Why This 4" Setup Is Different
The 4-inch version gets its full front rise from the lift spindles, so the factory front coil springs are not stacked with an additional spacer. That makes it a strong choice for an OBS street truck owner who wants spindle geometry with the original front spring rate. The 2-inch rear block adds useful rear clearance while still allowing the front lift to visually lead the stance. Final ride height and rake can vary with spring age, accessories, bed load and vehicle condition.
This version includes matched front and rear lift shocks plus the required shock mounting hardware, so the suspension package is more complete out of the box.
What Is Included
- Left and right 4-inch lift spindles for 1-inch rotor applications
- Pair of 2-inch rear lift / leveling blocks
- 4 Grade 8 U-bolts
- 8 U-bolt nuts
- 8 U-bolt washers
- 2 front lift shocks
- 2 rear lift shocks
- Front and rear shock mounting hardware
Exact Vehicle Fitment
- 1988-1991 Chevrolet C1500 Standard Cab 2WD
- 1988-1991 GMC C1500 Standard Cab 2WD
- Light-duty front brake package with approximately 1-inch-thick front rotors
Measure the Front Rotor Before Ordering
Standard cab does not automatically mean 1-inch brakes. Measure the front rotor thickness before ordering. These lift spindles do not fit the approximately 1.25-inch heavy-duty brake package and do not fit factory 454 SS models. SKC also carries the separate Trekline 1.25-inch-rotor C1500 lift-kit family for those trucks.
Installation & Wheel Notes
- 2WD C1500 coil-spring front suspension only; not for K1500/4WD or C2500.
- Requires 15-inch or larger wheels with a maximum 4.5-inch backspacing.
- Some 15-inch wheels may require minor spindle grinding or a wheel spacer for clearance.
- Lift spindles increase front track width approximately 1 inch per side.
- Factory alignment knockouts must be removed for fine alignment adjustment.
- Professional installation and a complete wheel alignment are recommended.
- Check brake hoses, ABS wiring, steering, suspension, tire and wheel clearance through full travel.
- Check rear shock travel, brake-hose clearance and driveline angles after lifting.
- U-bolts may need to be shortened after final torque; verify thread engagement and clearance before trimming.
Trekline SKU: 1350LFT110006
Chassis: GMT400 / OBS C1500
Advertised Front Lift: 4 inches
Front Lift Method: spindle-only front lift
Rear Block Height: 2 inches
Rotor Requirement: Approximately 1-inch front rotors only
Cab: Standard Cab
Drivetrain: 2WD
Shocks Included: Front and rear shocks
