Skip to main content

1988-1998 Chevrolet/GMC C2500 2WD 6-Lug 5" Lift Kit with 5" Rear Leveling Block - 1.25" Rotors | Trekline 1375LFT110037

Trekline

$489.06
(No reviews yet) Write a Review
SKU:
1375LFT110037
Trekline SKU:
1375LFT110037
Product Type:
Complete Lift Kit
Chassis:
GMT400 / OBS
Vehicle Fitment:
1988-1998 Chevrolet/GMC C2500 2WD 6-Lug
Cab Size:
Standard / Extended Cab
Drivetrain:
2WD
Lug Count:
6
Advertised Front Lift Height:
5 inches
Rear Leveling Block Height:
5 inches
Front Lift Method:
4-inch lift spindles plus nominal 1-inch front coil spacers
Shocks Included:
No
Rotor Requirement:
Approximately 1.25-inch front rotors only
Wheel Requirement:
16 inches or larger
Maximum Wheel Backspacing:
4.5 inches
Excluded Applications:
8-lug / 4WD / Suburban / SUV
Overload Spring Note:
Confirm rear U-bolts before ordering if factory overload springs are present
Included Rear Hardware:
Grade 8 U-bolts + nuts + washers
Adding to cart… The item has been added

1988-1998 Chevrolet/GMC C2500 2WD 6-Lug 5" Lift Kit with 5" Rear Leveling Block - 1.25" Rotors | Trekline 1375LFT110037

Built for the less-common six-lug 1988-1998 C2500 2WD, this Trekline package gives the truck 5 inches of advertised front lift. SKC names the kit by that front height; the 5-inch rear block is listed separately as the rear stance/leveling component rather than calling this a confusing “5/5” kit.

How This 5" C2500 Kit Gets Its Height

The 5-inch setup combines 4-inch lift spindles with a modest 1-inch front coil spacer for additional height without moving to the taller 2- or 3-inch spacer combinations. The 5-inch rear block gives the most rear height in this family and is aimed at owners who want substantial rear clearance or a stronger rake. This version leaves shocks out for builders who already have compatible extended-length dampers or want to choose their own shock package.

What Is Included

  • Left and right 4-inch front lift spindles
  • Pair of fabricated steel front coil spacers for nominal 1-inch additional front lift
  • Pair of 5-inch rear lift / leveling blocks
  • 4 Grade 8 rear U-bolts, 8 nuts and 8 washers
  • Shocks are not included in this version

Exact Vehicle Fitment

  • 1988-1998 Chevrolet C2500 2WD — six-lug pickup
  • 1988-1998 GMC C2500 2WD — six-lug pickup
  • Standard and extended cab configurations with factory coil-spring front suspension

Critical Fitment & Installation Notes

  • Six-lug C2500 only. Does not fit eight-lug C2500/C3500, 4WD, Suburban or SUV applications.
  • Requires approximately 1.25-inch-thick front brake rotors. Measure before ordering; these spindle kits do not fit the 1-inch light-duty brake package.
  • If the truck has rear overload springs, confirm U-bolt requirements before ordering.
  • Factory alignment knockouts must be removed to fine-tune alignment after installation.
  • Spindle-equipped kits require 16-inch or larger wheels with no more than 4.5 inches of backspacing. Front track width increases approximately 1 inch per side.
  • Lift height is nominal; spring age, accessories, payload and existing suspension changes can affect final stance.
  • Professional installation and a complete wheel alignment are recommended.
  • Verify steering, brake-hose, ABS-wire, shock, tire, wheel and driveline clearance through full travel.

Trekline SKU: 1375LFT110037
Chassis: GMT400 / OBS C2500
Drivetrain: 2WD
Wheel Pattern: 6-lug
Advertised Front Lift: 5 inches
Front Lift Method: 4-inch lift spindles plus nominal 1-inch front coil spacers
Rear Leveling Block: 5 inches
Shocks Included: No
Front Rotor Requirement: Approximately 1.25-inch rotors