2016-2018 Chevrolet Silverado / GMC Sierra 1500 Drop Spindle Hardware - M16-1.5 Aftermarket Ball Joints
This Trekline Motorsports spindle hardware kit is designed to provide the correct M16-1.5 lower-ball-joint thread interface when installing compatible Trekline drop spindles. Matching the correct ball-joint thread is critical for proper spindle seating, clamp load and safe front-suspension assembly.
Vehicle / Application Fitment:
- 2016-2018 Chevrolet Silverado 1500 2WD/4WD
- 2016-2018 GMC Sierra 1500 2WD/4WD
Important Fitment Notes:
- Designed for aftermarket lower ball joints with a M16-1.5 thread.
- Intended to preserve clearance for supported Trekline spindle wheel sizes when used with the applicable Trekline drop spindle.
- Sold as a pair/set for the driver and passenger side.
- Measure and verify your lower ball-joint thread before ordering. M16-1.5 and M16-2.0 hardware are not interchangeable.
- Some applications require trimming the lower ball-joint stud for proper clearance with the hardware and spindle.
- Fitment with other manufacturers' drop spindles cannot be guaranteed.
Installation: This is steering/suspension hardware. Install with the vehicle safely supported, follow proper torque procedures, and inspect ball-joint engagement and wheel clearance before driving.
Placement: Front
Brand: Trekline Motorsports
SKU: 80046005
