1988-1998 Chevrolet/GMC C2500 2WD 6-Lug 7" Lift Kit with 4" Rear Leveling Block - 1.25" Rotors | Trekline 1375LFT110051
Built for the less-common six-lug 1988-1998 C2500 2WD, this Trekline package gives the truck 7 inches of advertised front lift. SKC names the kit by that front height; the 4-inch rear block is listed separately as the rear stance/leveling component rather than calling this a confusing “7/4” kit.
How This 7" C2500 Kit Gets Its Height
The 7-inch package is the tallest current six-lug C2500 combination in this Trekline family, using 4-inch lift spindles plus a nominal 3-inch front coil spacer. The 4-inch rear block preserves more factory-style rake and rear clearance after the front is lifted. This version leaves shocks out for builders who already have compatible extended-length dampers or want to choose their own shock package.
What Is Included
- Left and right 4-inch front lift spindles
- Pair of fabricated steel front coil spacers for nominal 3-inch additional front lift
- Pair of 4-inch rear lift / leveling blocks
- 4 Grade 8 rear U-bolts, 8 nuts and 8 washers
- Shocks are not included in this version
Exact Vehicle Fitment
- 1988-1998 Chevrolet C2500 2WD — six-lug pickup
- 1988-1998 GMC C2500 2WD — six-lug pickup
- Standard and extended cab configurations with factory coil-spring front suspension
Critical Fitment & Installation Notes
- Six-lug C2500 only. Does not fit eight-lug C2500/C3500, 4WD, Suburban or SUV applications.
- Requires approximately 1.25-inch-thick front brake rotors. Measure before ordering; these spindle kits do not fit the 1-inch light-duty brake package.
- If the truck has rear overload springs, confirm U-bolt requirements before ordering.
- Factory alignment knockouts must be removed to fine-tune alignment after installation.
- Aftermarket upper control arms are recommended because this package uses 2-3 inches of front coil-spacer lift.
- Spindle-equipped kits require 16-inch or larger wheels with no more than 4.5 inches of backspacing. Front track width increases approximately 1 inch per side.
- Lift height is nominal; spring age, accessories, payload and existing suspension changes can affect final stance.
- Professional installation and a complete wheel alignment are recommended.
- Verify steering, brake-hose, ABS-wire, shock, tire, wheel and driveline clearance through full travel.
Trekline SKU: 1375LFT110051
Chassis: GMT400 / OBS C2500
Drivetrain: 2WD
Wheel Pattern: 6-lug
Advertised Front Lift: 7 inches
Front Lift Method: 4-inch lift spindles plus nominal 3-inch front coil spacers
Rear Leveling Block: 4 inches
Shocks Included: No
Front Rotor Requirement: Approximately 1.25-inch rotors
